LED Street Light-RMS-L2013

Romanso RMS-L2013 LED Street Light is designed to offer better security, more lumens, and higher cost savings. Using up to 70% less power over traditional metal halide or high pressure sodium lighting. This product is optimal for retrofit installations or new construction installations.

Inquire Now Next Product

Product Description

Product Feature:

● Use CREE LED, high brightness 130lm/W, stable lighting performance

● High reliable LED driver results in energy savings upto 65%

● Choose between T2/T3/T4 light distributions

● Photocell and motion sensor are available

● IP65 rated for external roadway illumination

● Working environment in -35℃ to 55℃.

● Easy installation and maintenance

● 5 years warranty with >50,000 hours lifespan

● CE/RoHS/LM80/IES file are available.using for better anti-corrosion.

● ETL/DLC/CE/RoHS/LM79/LM80/IES for quality assurance and safe operation.

Product Specification:

Item NO.	RMS-L201350	RMS-L2013100	RMS-L2013150	RMS-L2013200
Watt	50W	100W	150W	200W
Total Lumens	6500LM	13000LM	19500LM	26000LM
Dimension	483230127mm	548230127mm	598257129mm	655320122mm
Beam Angle	TYPE2 / TYPE3 / TYPE4
LED Brand	CREE 3030
CCT	2700K-6500K
Input Voltage	AC100-277V, 50-60Hz
CRI	Ra>70
Power Factor	>0.9
Surge Voltage	4KV; 20KV optional
Operating Temperature	-35℃~55℃
IP Rating	IP65
Safety Certification	CE/RoHS/LM80/IES
Warranty Time	5 Years

LED Street Light-RMS-L2013

Product Details:

Dimension:

LED Street Light-RMS-L2013

Beam Angle:

Type II

The Type II distribution is used for wide walkways, on ramps and entrance roadways, as well

as other long, narrow lighting. This type is meant for lighting larger areas and usually is located

near the roadside. You'll find this type of lighting mostly on smaller side streets or jogging paths.

Type III

The Type III distribution is meant for roadway lighting, general parking

areas and other areas where a larger area of lighting is required.

Type III lighting needs to be placed to the side of the area, allowing the

light to project outward and fill the area. This produces a filling light flow.

Type IV

The Type IV distribution produces a semicircular light meant for mounting

on thesides of buildings and walls. It's best for illuminating the perimeter

of parkingareas and businesses.

Application:

Widely used for Parking Lot Lighting, Square Lighting, Roadway Lighting, Outdoor Area Lighting,

High Mast Lighting, Area Lighting.